DOSAGE FORMS & STRENGTHS SECTION.

DIRECTIONS FOR USE. To ensure full fluorescence and patient comfort, the GloStrip(R) impregnated tip should be moistened with one or two drops of sterile, isotonic saline or irrigating solution before application.Touch conjunctiva or fornix as required with moistened tip. It is recommended that the patient blink several times after application.. NOTE: The contents may not be sterile if the individual strip package has been damaged or previously opened. This product is intended for external use only. Keep out of reach of children. Store below 30C.

HOW SUPPLIED SECTION.

HOW SUPPLIED. Carton containing 100 or 300 sterile strips.

INDICATIONS & USAGE SECTION.

INDICATIONS. For staining the anterior segment of the eye in disclosing corneal injury, in applanation tonometry and when fitting contact lenses.

INSTRUCTIONS FOR USE SECTION.

INSTRUCTIONS FOR OPENING STERILE GLOSTRIPS(R) 1.Grasp free tab ends of wrapping and slowly pull apart. When the white paper handle becomes visible, remove the GloStrip(R) from the envelope.. Figure 1. An Alternate Method of Opening. 1.Grasp envelope firmly with two hands as shown in Fig. below. Tear the envelope from both its edges to the strip handle.2.Hold the handle end of the GloStrip(R) with the left hand and the paper envelope without holding the tip with the right hand. See Fig. 3.Separate the envelope at the tear, exposing the GloStrip(R) tip. See Fig. . Figure 2. Figure 3. Figure 4.

PACKAGE LABEL.PRINCIPAL DISPLAY PANEL.

PRINCIPAL DISPLAY PANEL 300 Strip Carton. NDC 51801-009-50AMCON(R) Laboratories, Inc.Fluorescein GloStrips(R)1.0 1.01.0 mg Fluorescein SodiumOphthalmic Strips USP300 Sterile Strips. PRINCIPAL DISPLAY PANEL 300 Strip Carton.

SPL UNCLASSIFIED SECTION.

Fluorescein Sodium Ophthalmic Strips U.S.P. diagnostic agent is for professional use onlyEach strip is impregnated with 1.0 mg of fluorescein sodium USP.